Справочник Пользователя для Toshiba ETH-100

 

  

44

The Point Monitor page can be accessed by clicking on the “Point Monitor” tab 
located at the top of the browser window.  Refer to Figure 23 for a screen shot 
of the Point Monitor Page. 
 

 

 
This page provides a monitor and control interface for the ETH-100’s point 
database.  Use the “channel select” drop down box to select the ASD channel 
to be monitored.  The displayed point values are then updated every 1 second. 
 
The “value” field may indicate an error code if a problem occurs.  A flyout list of 
error codes and their meanings can be accessed by clicking the “Error Codes” 
button at the bottom of the screen (Refer to Figure 24). 
 
Values may be interactively changed at any time.  To change a point’s value, 
click on the “value” field of the point you wish to edit.  This will open the point 
for editing (Refer to Figure 24).  Change the point’s value to the desired value 
and click the “upload” button (the icon with three blue arrows).  You may 
cancel changes at any time by clicking the “cancel” button (the red “X” icon). 
 
Notice again that the “dec” and “hex” buttons will change the radix of the 
entered value.  Always ensure that any values you may enter are appropriate 
for the selected radix.