Листовка для TP-LINK TL-WR841HP
Hardware Connection
1
Quick Installation Guide
300Mbps High Power Router
MODEL NO.
TL-WR841HP
Configuration for Windows with Setup Wizard
2
7106504243 REV1.0.0
Package Contents
QIG
300Mbps High Power Router
MODEL NO.
TL-WR841HP
Resource CD
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
3
After confirming the hardware connection and the status
of LEDs, please click NEXT to continue.
of LEDs, please click NEXT to continue.
4
After the connectivity is checked successfully, please click
NEXT.
5
Select the connection type your ISP provides and click NEXT.
Here we take Dynamic IP for example.
Here we take Dynamic IP for example.
7
You can rename your wireless network on this page.
The default wireless name is TP-LINK_XXXXXX. Click
The default wireless name is TP-LINK_XXXXXX. Click
NEXT to continue.
8
You are recommended to select Most Security
(WPA2-PSK) to secure your wireless network.
6
If you are utilizing a cable modem to access the Internet,
you may need to clone your MAC address.
you may need to clone your MAC address.
Ethernet Cable
TL-WR841HP
Power Adapter
If you are using a MAC/Linux or a windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.
(To be continued)
Connect the INTERNET port on your router to the modem’s LAN port with an Ethernet cable.
Connect your computer to one of the ETHERNET ports labeled 1~4 on the router with an Ethernet cable.
Connect your computer to one of the ETHERNET ports labeled 1~4 on the router with an Ethernet cable.
Plug the provided power adapter into the POWER jack on the back of the router and the other end to a standard electrical wall socket.
1
2
3
Power off your modem.
4
5
Power on the modem and wait for one minute .
The default wireless
password, the same
as the PIN code, is
printed on the label
at the bottom of the
Router.
The Router is
pre-encrypted.
2
3
Cable/DSL Modem
4
Wall Socket
Internet
5
Wall Socket
WPS/
RESET
1
2
3
4
POWER
INTERNET
WPS/
RESET
1
2
3
4
POWER
INTERNET
2
Select TL-WR841HP and click Easy Setup Assistant.