Справочник Пользователя для TP-LINK External ADSL2+ Rounter

manufacturer’s setup.   

¾ 

1~4(LAN): Connect with your computer’s NIC.       

¾ 

LINE(WAN): Connect to the MODEM Port of Splitter or Connecting the telephone 

line. 

 

2.4 Hardware installation procedures（figure2-1） 

The procedure to install the Router can be described in general terms in the 
following steps: 

First Step: Connecting the MODEM port of Splitter with the TD-8840 ADSL2+ ROUTER 

LINE port by telephone line. While you need to use a telephone, please attach telephone 

line into the phone of Splitter. 

Second Step: Connect category 5 cable with RJ45 jacks to the ADSL2+ ROUTER’s 

LAN port and your computer’s NIC.   

Third Step: Plug one end of the AC Power Adapter into the Power jack on the Ethernet 

ADSL2+ ROUTER and the other end to a standard electrical outlet. 

Last Step: Check the line connection to see if everything is ready. Power up finally. 

 

（Figure2-1） 

 

 

 

 

 

 

- 6 -