Справочник Пользователя для Sim2 Multimedia SVP 420 HB

SVP 450 PLUS - SVD 500 PLUS

30

To store a new input signal in a memory bank press 

and you will enter the MEMORY MANAGER mode.

The following menu will appear:

Use the arrow   or   and the left arrow to select LOAD.
Press ENTER to confirm, the following menu will appear:
Use the arrow   or   to select un memory bank from 01

to 25 and press ENTER. The following message will
appear under the table:

The name of the first bank available will be highlighted.
Use the arrow   or   to write a mnemonic name. Press
the right arrow to select the aspect ratio and use the arrow

 or   to select the desired one. Finally, press ENTER to

store the new entry.
Should there be no signal, one having the following
features will be stored: 31.25 KHz, 50 Hz. Press the arrow

 or   to select field F and press ENTER to confirm the

you wish to change the field. Use the arrow   or   to
change the aspect ratio.
Press ENTER to confirm the selection or EXIT to exit.
Select the desired memory bank by means of the up or
down arrows. Press EXIT to exit.
Press ENTER to confirm and store the data.
Use the left or right arrow to select only the name of the
bank. Press ENTER  to enter in the writing mode and
change the letters by means of the up or down arrow.
Press  ENTER  to confirm the name or EXIT  to exit the
menu.
Use the up or down arrows to select one of the following
functions: Loading, Copy, Move, Delete and press ENTER
to confirm.
Use the button to go from the right side of the menu to the
left one and go back by means of the EXIT button.

To exit this menu, press EXIT. The projector will indicate
the previous menu. Press ESC to exit.

This is possible only if there is a match between the input
frequencies and the frequencies stored in the memory
bank.

Press ENTER to confirm or EXIT to exit.
If the input signal frequencies (horizontal and vertical) do
not match the selected memory bank, the following
message will appear under the table.

If they do, the following message will appear:

Upon pressing ENTER, the memory bank number will
appear under the label WORK.
Press EXIT to exit this menu. The video projector will take
you back to the previous menu.
Press ESC to enter the menu again.

Use the arrow   or   to select COPY and press ENTER,
the following message will appear:

Use the arrow   or   to select a memory bank (from 01 to
25) to be copied and press ENTER.