Справочник Пользователя для Hitachi CP-X2521WN

41

INPUT menu

The computer input signal type for COMPUTER IN1 and IN2 ports 

can be set.
(1)  Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
(2)  Use the ◄/► buttons to select 

the computer input signal type.

AUTO Ù SYNC ON G OFF

• Selecting the AUTO mode allows  

you to input a sync on G signal or component video signal from the 

port (

11, 13).

• In the AUTO mode, the picture may be distorted with certain 

input signals. In such a case, remove the signal connector so that 

no signal is received and select the SYNC ON G OFF, and then 

reconnect the signal.

Set the frame lock function on/off for each port.
(1)  Use the ▲/▼ buttons to select 

the input ports.

(2)  Use the ◄/► buttons to turn the 

frame lock function on/off .

ON Ù OFF

• This item can be performed only on a signal with a vertical 

frequency of 49 to 51Hz, 59 to 61 Hz.

• When ON is selected, moving pictures are displayed more 

smoothly.

(continued on next page)