Справочник Пользователя для Toshiba B-SA4TM-GS12-QM-R

ENGLISH VERSION EO1-33048 

2.5 Connecting the Printer to Your Host Computer

E2-14 

 

The following paragraphs outline how to connect your host computer to 
the printer, and will also show how to make cable connections to other 
devices.  Depending on the system configuration you use to print labels, 
there are 5 possibilities for connecting the printer to your host computer.  
These are: 

•  A parallel cable connection between the printer’s standard parallel 

connector and your host computer’s parallel port (LPT). 

•  An Ethernet connection using the standard LAN board.  

•  A USB cable connection between the printer’s standard USB 

connector and your host computer’s USB port. (Conforming to 
USB 2.0 Full Speed) 

•  A serial cable connection between the printer’s optional RS-232C 

serial connector and one of your host computer’s COM ports.  
<Option> 

•  Wireless LAN using an optional Wireless LAN board.  <Option> 

After connecting the necessary interface cables, set an operating 
environment of the printer.  Refer to Section 2.7.2 Parameter Setting.  
 

The diagram below shows all the possible cable connections to the 
current version of the printer. 
 

 

 

 

Parallel Interface Connector 
(Centronics) 

Serial Interface Connector 
(Option) 

Power Inlet 

USB Interface Connector

LAN Interface Connector

Wireless LAN Interface Board 
(Option) 

Cable Clamp 

SMW-3x8