Справочник Пользователя для TROY Group TROY200 Series

 

 

Document #40181-120  Rev. A 

 

To print using a wireless print server, you will need an 802.11a, 802.11b, or 802.11g wireless network 
consisting of either of the following: 

 

  An 802.11a, 802.11b, or 802.11g wireless-enabled PC or Macintosh printing straight to the printer 

(Ad-Hoc or Peer-to-Peer Mode). 

  An 802.11a, 802.11b, or 802.11g wireless access point that allows wireless and wired Ethernet-

enabled computers to print to the wireless print server. 

 

To configure and print to the wireless print server, you will need the following information from your 
wireless network administrator: 

 

  Wireless Mode used (Infrastructure or Ad-Hoc) 
  The SSID (service set identifier) for your wireless network. 
  If you are using TCP/IP (recommended for Windows Networks) and are not connected to a DHCP 

server (for obtaining an IP Address automatically), you will need a unique IP Address for the 
wireless print server (for example: 192.168.1.14).  If the wireless print server is not on the same IP 
subnet as the computers you are printing from, you will also need a subnet mask and a router 
(default gateway) address. 

  Wireless security settings