Справочник Пользователя для Panasonic DA-PC700
3
30
3.1
Flow of Printing
3.1.1
For Windows
The basic flow of printing from a Windows environment after installing the printer
driver is as follows:
(This may differ according to the host computer and system configuration used.)
driver is as follows:
(This may differ according to the host computer and system configuration used.)
Refer to the manual of the application regarding its operation.
Before sending print data from the client computer, check the following:
(1) Port status in Tools Mode>Printer/Scan Mode Settings>Port Settings
(1) Port status in Tools Mode>Printer/Scan Mode Settings>Port Settings
(the enabled port is highlighted)
(2) Print mode of the port in Port Settings>(selected port)>Print Mode
"Chapter 13 Configuring by the Tools Mode Screen"
Refer to the manual of the application regarding its operation.
"3.3 Cancelling Printing From Printer"
"3.4 Forced Outputting"
Activate application software used by the host
device
Operate menu
If necessary
Specify printing from application software
Stop printing
Output
End
If necessary
If necessary