Справочник Пользователя для Epson EPL-N2550
Using the PostScript Printer Driver
129
5
5
5
5
5
5
5
5
5
5
5
5
Note:
For best results, you should connect the printer directly to the computer’s
USB port. If multiple USB hubs must be used, we recommend that you
connect the printer to the first-tier hub.
For best results, you should connect the printer directly to the computer’s
USB port. If multiple USB hubs must be used, we recommend that you
connect the printer to the first-tier hub.
Using the PostScript Printer Driver with
Windows
Windows
To print in the PostScript mode, you will have to install the printer
driver. See the appropriate sections below for installation
instructions according to the interface that you are using to print.
driver. See the appropriate sections below for installation
instructions according to the interface that you are using to print.
Installing the PostScript printer driver for the
parallel interface
parallel interface
Follow the steps below to install the PostScript printer driver for
the parallel interface.
the parallel interface.
c
Caution:
Never use EPSON Status Monitor when the printer is connected
via a parallel port. It may damage the system.
Never use EPSON Status Monitor when the printer is connected
via a parallel port. It may damage the system.
Note:
❏ Installing the printer software for Windows XP or 2000 may require
administrator privileges. If you have problems, ask your
administrator for more information.
administrator for more information.
❏ Turn off all virus protection programs before installing the printer
software.
1. Make sure that the printer is turned off. Insert the printer
software CD-ROM into your CD-ROM drive.