Справочник Пользователя для Panasonic DP-C263
40
Chapter 3 Scanner Settings
Chapter 3
Scanner Settings
Setting the Scanning Quality
Documents, whether in Full Color or Monochrome, are scanned in three-colors.
z
Color mode settings are reset to their factory defaults when:
-The Reset key is pressed.
-The Auto Reset Time interval has lapsed (default = 1 min).
-The power is turned OFF.
-A scan job is completed.
-The Reset key is pressed.
-The Auto Reset Time interval has lapsed (default = 1 min).
-The power is turned OFF.
-A scan job is completed.
1
Press the Scan/Email key.
2
Select “Basic Menu”.
3
Set the desired scanning modes.
Quality Adjustment
Color Setting
1
Select the Color Mode, and then “OK”.
z
If the above screen is not displayed. (See
page 40, steps 1 to 3)
page 40, steps 1 to 3)
Quality Adj.
File Type and Name (see page 48)
Original Size:
From Platen Glass only.
When the original size is not correctly
detected, select “Original Size”, and then
select original size and touch “OK” on the
display.
When the original size is not correctly
detected, select “Original Size”, and then
select original size and touch “OK” on the
display.
2-Sided Original (see page 50)
Job Build and SADF (see page 52, 53)
Multi-Size Feed:
When scanning mixed size originals, select
“Multi-Size Feed”.
“Multi-Size Feed”.
Ex: 8.5" x 11" and 11" x 17" size originals
Full Color Mode
Color Original
Three-colors
(Red, Green
and Blue)
(Red, Green
and Blue)
Grayscale Mode
Color Original
Grayscale
(Halftone)
(Halftone)
Black Mode
Color Original
Monochrome
(Bi-level)
(Bi-level)
Monochrome Original
Monochrome
(Bi-level)
(Bi-level)