Справочник Пользователя для Pelco cm6800-322x6

C1522M-C (2/05)

19

You can connect up to eight KBD100/200A/300A Series keyboards to either of the following ports:

•

COM 4 (up to 8 remotely connected keyboards)

•

COM 5 (1 direct-powered keyboard or up to 8 remotely connected keyboards)

The total number of KBD100/200A/300A Series keyboards connected to the CM6800-32X6 cannot exceed eight.

Use COM 5 (Serial Port 5) for a direct-powered local keyboard. COM 5 can power one KBD100/200A/300A Series keyboard.

If you are connecting more than one keyboard to COM 5, a KBDKIT(-X) is required for each keyboard. Refer to the 

KBD100, KBD200A, and

KBD300A: Remote Keyboards section.

1.

Using the 25-foot (7.62 m) straight data cable supplied with the keyboard, plug one end into the RJ-45 connector on the rear of the
keyboard.

NOTE:  If distance between CM6800 and keyboard exceeds 25 feet, use KBDKIT(-X).

Figure 12.  Data Cable Plugged into Local Keyboard

2.

Plug the other end of the data cable into COM 5 on the CM6800-32X6.

KBD300A

Figure 13.  Data Cable Plugged into COM 5

 

KBD100, 200A, 300A

RJ-45 PIN-OUTS

1  Tx+
2  Tx-
3  12V
4  12V
5  GROUND
6  NC
7  Rx-
8  Rx+

CM6800-32X6 COM 5  

RJ-45 PIN-OUTS

1  Rx+
2  Rx-
3  KBD 12V
4  KBD GROUND
5  GROUND
6  NC
7  Tx-
8  Tx+

KBD100, KBD200A, KBD300A

THE CM6800-32X6 CAN POWER ONE KBD 100/200A/300A SERIES KEYBOARD ON COM 5.