Справочник Пользователя для Pelco cm6800-322x6
50
C1522M-C (2/05)
PASSWORD
Use the Set Password screen to change the system password.
If you change the password and then forget the new one, you will have to reset the system to the factory defaults. All system program-
ming will be lost. Pelco recommends uploading your programming settings to the CM6800-MGR before changing the password. This
allows you to download the previous system settings, in the event of a system reset. If necessary, refer to the
ming will be lost. Pelco recommends uploading your programming settings to the CM6800-MGR before changing the password. This
allows you to download the previous system settings, in the event of a system reset. If necessary, refer to the
Troubleshooting section for
the system reset procedure.
Figure 40. Access the Set Password Screen
Use the numerical keypad to enter the old and new passwords. The password must be seven digits.
1.
Enter the current password (Default: 2899100).
2.
Enter the new password.
3.
Enter the new password again as a verification check.
Once the new password is accepted, the Main Menu appears.
PELCO SWITCHER
MODEL CM6800
MAIN MENU
1
CAMERA
2
LOGICAL CAMERA
3
MONITOR
4
ACCESS
5
TIME & DATE
6
PORT
7
PRIORITY
8
SEQUENCE
9
MACRO
10
ALARM CONTACTS
11
EVENT TIMER
12
SET AUXILIARY
13
SET PASSWORD
14
ABOUT CM6800
ENGLISH
RETURN
00654
SET PASSWORD
OLD PASSWORD:
*******
NEW PASSWORD: *******
VER PASSWORD:
VER PASSWORD:
*******
RETURN
00656