Справочник Пользователя для Lexmark 620
59
20
Replacing the fuser assembly
Order a new fuser assembly when toner fog or background shading appears on printed pages. See
for information on ordering a fuser assembly.
Complete the following steps to replace the fuser assembly. Refer to the documentation that comes
with the fuser assembly for detailed installation information.
with the fuser assembly for detailed installation information.
CAUTION:
The fuser assembly is hot! Turn the printer off and wait twenty minutes before
changing the fuser assembly.
changing the fuser assembly.
1
Turn the printer off, unplug the printer power cord, and wait twenty minutes.
2
Remove the top cover and all installed output options. If a duplex unit is installed, remove it.
3
Remove the fuser cover.
4
Lift up and remove the fuser cleaner.
5
Open the rear access door and remove the redrive.
6
Remove the old fuser assembly.
Note: For best results, use Lexmark supplies with the printer. If you are in the U.S. or
Canada, call 1-800-438-2468 for information about Lexmark Authorized Supplies
Dealers in your area. In other countries, contact the place where you bought your
printer.
Dealers in your area. In other countries, contact the place where you bought your
printer.
7
Install the new fuser assembly and replace the redrive.
8
Close the rear access door and replace the fuser cover.
9
If you have a duplex unit, reinstall it. Reinstall all output options and the printer top cover.
10
Plug the printer power cord into a properly grounded electrical outlet.
11