Справочник Пользователя для MGE UPS Systems 3200C
34007532EN/AA
- Page 13
2. Installation
2.4 Connection to the RS232 or USB communications port (optional)
1 - Connect the RS232 30 or USB 31
communications cable to the serial port or
the USB port on the computer.
communications cable to the serial port or
the USB port on the computer.
2 - Connect the other end of the
communications cable 30 or 31 to the
RS232 2 or USB 3 communications
port on the UPS.
communications cable 30 or 31 to the
RS232 2 or USB 3 communications
port on the UPS.
The UPS can now communicate with all
MGE UPS SYSTEMS supervision, set-up or
safety software.
MGE UPS SYSTEMS supervision, set-up or
safety software.
30
31
The RS232 and USB communications ports cannot operate simultaneously.
2.5 Installation of the communications-card option
It is not necessary to shut down the UPS to
install the communications card:
install the communications card:
1 - Remove the slot 1 cover secured by
two screws.
two screws.
2 - Insert the card in the slot.
3 - Secure the card with the two screws.
Slot for the
communications-
card option.
communications-
card option.
3
2
1