Справочник Пользователя для Panasonic PT-D995U

MENU/ENTER
button

Normally, use the source setting in AUTO. If use in AUTO is unstable

such as color not appearing, the screen image is disturbed or
intermitted, then set to the dedicated source (forced mode) in
accordance with the input signal.

When shipped from the factory, the source settings are as follows:

VIDEO

NTSC

COMPUTER 1

AUTO

Y/C

NTSC

COMPUTER 2

AUTO

Y, P

B

/B-Y, P

R

/R-Y

AUTO

Cursor buttons

Depending on the signal from a device connected, adjustment may be needed

after a dedicated source is set. If that is the case, adjust the appropriate

items.
When the input mode (SOURCE) is VIDEO or Y/C, and if AUTO is set, the
automatic detecting function may work, possibly causing the screen to be
intermitted or disturbed. In that case, set to a dedicated source (forced mode).

When special effect playback (fast-forward/ twice-speed/triple-speed) is
performed on a video deck, etc, the picture may be disturbed or intermitted,
depending on the device.

PAGE BACK button

Submenu item [SOURCE]

The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.

Items that can be set are different when video signals are
input and when computer signals are input.
For dedicated source signals (corresponding frequency, etc.)

for computer signals, see page 21.

The main menu appears on the screen.

The SOURCE item (shown in text) is indicated in magenta color.

The submenu items, SOURCE menu, appears on the screen.

The display in ( ) shows
the currently set status.

(SOURCE menu)

The item to set is shown in magenta color.

(To be continued on the next page)