Справочник Пользователя для Panasonic PT-D6000

J

• For the specifications of the RGB signals that can be applied from the computer, see the data sheet of the operating 

instructions that is provided with the projector.

• If your computer has the resume feature (last memory), the computer may not function properly until the resume capability 

is disabled.

• When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD terminals.
• When using DVI-D input, EDID settings may be required for the connected device. See “DVI-D IN” on page 26.

• When connecting with a VCR, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between the 

projector and the VCR.

• If non-standard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the 

projector and the VCR.

• The DVI-D signals input terminal supports only a single link.
• The HDMI - DVI-D conversion cable is required to connect an HDMI compliant device.
• It is possible to connect the DVI-D input terminal with an HDMI- or DVI-D compliant device, but with some devices the 

images may not appear or other problems may be encountered in operation.

Control

Computers

Control

Projector 1

Projector 2

Control

VCR

HDMI equipped 
DVD player (HDCP)