Справочник Пользователя для Panasonic PT-D6000
PICTURE menu
E
NGLISH - 17
Settings
You can adjust the brightness of white area of the image. Call
up the bar scale by pressing I, H or the ENTER button, and
press I H to adjust the value.
up the bar scale by pressing I, H or the ENTER button, and
press I H to adjust the value.
You can keep the projected image bright and vivid even in well-
lit rooms where the ambient light sources cannot be controlled,
such as when a door opens or when window coverings fail to
block out sunlight. Press I H to cycle through the options.
lit rooms where the ambient light sources cannot be controlled,
such as when a door opens or when window coverings fail to
block out sunlight. Press I H to cycle through the options.
You can adjust the sharpness of the projected image. Call up
the bar scale by pressing I, H or the ENTER button, and
press I H to adjust the value.
the bar scale by pressing I, H or the ENTER button, and
press I H to adjust the value.
You can select the automatic noise reduction system strength.
Press I H to cycle through the options.
Press I H to cycle through the options.
You can switch on/off the auto iris control system. Press I H
to switch between ON or OFF.
to switch between ON or OFF.
When the input signal is changed, the projector detects the
colour system and selects the matched setting automatically,
or you can select manually. Press I H to cycle through the
options.
colour system and selects the matched setting automatically,
or you can select manually. Press I H to cycle through the
options.
WHITE GAIN
I
More natural white
H
Whiter
Setting range: 0 to +10
SYSTEM DAYLIGHT VIEW
OFF
Deactive
1
Low
2
Middle
3
High
SHARPNESS
I
Less sharp
H
More sharp
Setting range: 0 to +15
NOISE REDUCTION
OFF
Deactive
1
Low
2
Middle
3
High
AI
ON
Active
OFF
Deactive
SYSTEM SELECTOR
VIDEO/S-VIDEO terminal
AUTO HNTSC HNTSC 4.43 HPAL HPAL-M HPAL-N HSECAM
HPAL60
HPAL60
• AUTO is usually recommended.
• Selecting options of AUTO are NTSC/NTSC 4.43/PAL/PAL-
• Selecting options of AUTO are NTSC/NTSC 4.43/PAL/PAL-
M/PAL-N/SECAM/PAL60.
RGB 1 IN/RGB 2 IN terminal
480i/576i/576p signals
RGB HYC
B
C
R
VGA60/480p signals:
VGA60 H480p H480pRGB
Other signals
RGB HYP
B
P
R
• See "List of compatible signals" in the Operating Instructions
that provided with the projector.
SDI terminal (PT-DZ6710 only)
AUTO H 1080
⁄60i H 1035⁄60i H 720⁄60p H 1080⁄24p H 1080⁄50i
H 1080
⁄30p H 1080⁄25p H 1080⁄24sF H 720⁄50p H 480i H 576i