Справочник Пользователя для Panasonic PT-D6000

Q

You can adjust brightness around borderline of the 
image area to minimise the difference between the 
overlapping area and the image. Select BRIGHT 
ADJUST and press the ENTER button. Press F G to 
select a colour, and I H to change the value.

When there is gap between the image area and the projecting 
area, you can move the image inside of the projecting area.

 

INTERLOCKED: ON

 

Adjust WHITE only.

 

INTERLOCKED: OFF

 

Adjust RED, GREEN and BLUE 
individually. Setting range: 0 to +255

 

INTERLOCKED: ON

 

Adjust WHITE only.

 

INTERLOCKED: OFF

 

Adjust RED, GREEN and BLUE 
individually. Setting range: 0 to +255

If, after the BRIGHT INSIDE adjustment, 
only the vicinity of the borders of the areas 
where the pictures overlap and where the 
pictures do not overlap becomes bright, 
proceed to adjust the width of connecting 
side.

Edge blending width 
(right)

Projection range

Bright adjustment 
(right)

Marker

• Alternatively, if only the vicinity of the borders has brightened as a result of the width adjustments, proceed with the BRIGHT OUTSIDE 

adjustment.

• When a rear screen or screen with a high gain is used, the joints may appear to be discontinuous depending on the viewing position.

Press F G to move the image up or 
down.

Press I H to move the image to the 
left or right.