Справочник Пользователя для Panasonic PT-FW100NTE

When you start the projection for the first time, the minimum required setting screen for projection will be displayed.

J

Select the required language setting.

Press F G I H buttons of the Remote control or 
Control panel on the projector to highlight the 
required language, and press ENTER to proceed to 
the next setting.

J

Select the current projection method, screen size 
and fan speed setting. If you need return to the 
previous setting, press the RETURTN button.

Press I H buttons of the Remote control or 
Control panel on the projector to select the 
required installation method. Press G to proceed to 
the HIGHLAND setting.

Select the required screen format by pressing I 
H.

 

When project on a 16:10 or 4:3 
screen.

 

When project on a 16:9 screen.

If you use the projector at high elevation, the 
HIGHLAND setting need to be ON to set the fan 
speed high. Press I H to select the required 
option. If you need to return to the INSTALLATION, 
press F.

 

The fan speed is low.

 

The fan speed is high.

 

Once you finish the minimum requirement setting, it will not be displayed again unless the projector is 
initialised. See “INITIALIZE ALL” on page 38.

 

You can change the settings from the MAIN MENU. See “Menu Navigation” on page 29.

LANGUAGE

SELECT

PLEASE SELECT LANGUAGE

ENTER

INSTALLATION

OPTION

FRONT/DESK

HIGHLAND

OFF

SCREEN FORMAT

16:10

SELECT

ENTER

RETURN

Setting on a desk/floor and 
projecting from front

Mounting in the ceiling and 
projecting from front

Setting on a desk/floor and 
projecting from rear

Mounting in the ceiling and 
projecting from rear

• At 1 400 m (4 593 ft) above sea level, the setting must 

be ON.

• The loudness of fan noise depends on the HIGHLAND 

setting.