Справочник Пользователя для Panasonic PT-FW100NTE

You can switch the input method manually by 
pressing the COMPUTER, NETWORK and 
VIDEO buttons. Press the required button 
several times or I H to cycle through the 
input methods as follows. The actual 
projected image will be changed in a while.

 

The graphical guidance will be displayed on the upper 
right of the projected image and you can confirm the 
selected input method which is highlighted in yellow. See 
“INPUT GUIDE” on page 36.

J

J

 

See CD-ROM contents for more detailed information.

J

J

You can highlight items on the screen with 
the red laser pointer while projecting the 
image in presentations or visual 
demonstrations as an eye-catching pointing 
device.
Hold down the LASER button to goes on the 
laser pointer and release to goes off.

J

You can deactivate the LASER button for an 
accidental operation.

1. Open the battery compartment cover of the 

Remote control.

2. Slide the switch tab.
3. Close the battery compartment cover of the 

Remote control.

 

• Only when the COMPUTER2 SELECT is set to INPUT, 

you can switch between COMPUTER1 and 
COMPUTER2.

• If you select an unplugged input method, the guidance will blink on and off several times.
• See “List of compatible signals” on page 46.
• See “Connections” on page 20.

• The laser pointer should never be projected directly into 

the eyes of a person or animal.

• Do not aim the laser at reflective surfaces.
• Do not allow children to use laser pointer.
• Never look directly into the laser beam.
• The laser pointer is not effective with translucent 

screens.

• Please read the cautions on the Remote control.
• This is a Class 2 laser product.

CAUTION: Use of controls of adjustments or performance 
of procedures other than those specified herein may result in 
hazardous radiation exposure.

On

Off

 

Deactivating switch

 

Top view

Laser pointer beam emitter

 

Cautions