Справочник Пользователя для Panasonic PT-FW100NTE
E
NGLISH - 36
Settings
OPTION menu
When you change the input method, the guidance
appears in the upper right corner of the screen. The
following display methods are available. Press I H to
cycle through the options.
appears in the upper right corner of the screen. The
following display methods are available. Press I H to
cycle through the options.
You can switch the logo on/off that is displayed when
starting up the projector. Press I H to select the
required option. STARTUP LOGO will be displayed for
30 seconds.
starting up the projector. Press I H to select the
required option. STARTUP LOGO will be displayed for
30 seconds.
ON
Active
OFF
Deactive
USER
Display the original text
Q
Editing the original text
If you select USER, you can display the 2 lines of
original text up to 40 characters in 1 line instead of
the logo.
original text up to 40 characters in 1 line instead of
the logo.
1. Select USER and press ENTER.
2. Select the required line to enter or edit the original
2. Select the required line to enter or edit the original
text, and press ENTER.
3. Use F G I H to specify the location of the
required character and press ENTER.
The selected character will be displayed in the box.
Select DELETE to delete the last entered character
and press ENTER.
and press ENTER.
4. Repeat the step 3 until you finish the text to display
in a line.
5. Select OK and press ENTER to set the entered
text in a box.
Press G and edit the TEXT2 if you need to, and
repeat the step 3 - 5.
repeat the step 3 - 5.
You can switch the function of the COMPUTER2 IN/
1 OUT terminal.
1 OUT terminal.
INPUT
COMPUTER2 IN
OUTPUT
COMPUTER1 OUT
You can change the pace of the ARF (Auto Rolling Filter)
performance for the use environment. Press I H to
select the required option.
performance for the use environment. Press I H to
select the required option.
1
Ventilated with indoor air (e.g. small
office room)
office room)
2
Ventilated with outdoor air (e.g. large
office room, class room)
office room, class room)
3
Public indoor space (e.g. restaurant,
building lobby)
building lobby)
You can check the remaining amount of the ARF (Auto
Rolling Filter). The colour of the bar scale is indicating
the condition of the ARF.
Rolling Filter). The colour of the bar scale is indicating
the condition of the ARF.
Yellow
The filter remaining amount is getting
low.
low.
Red
No more remaining.
INPUT GUIDE
Options
Function
OFF
Turn off the guidance.
SIMPLE
Display the input method by text.
The INPUT GUIDE will go out after
5 seconds without any operation.
The INPUT GUIDE will go out after
5 seconds without any operation.
DETAILED
Display the input method by graphic.
The INPUT GUIDE will go out after
10 seconds without any operation.
If you select any COMPUTER
terminal which has no signal, the
computer connection guidance will
be displayed. See “Computer
connection guidance” on page 48.
The INPUT GUIDE will go out after
10 seconds without any operation.
If you select any COMPUTER
terminal which has no signal, the
computer connection guidance will
be displayed. See “Computer
connection guidance” on page 48.
STARTUP LOGO
Remote control
Control panel
OK
CANCEL
DELETE
TEXT CHANGE
COMPUTER2 SELECT
FILTER SETUP
NOTE:
• The ARF is a nonreusable product.
• Select the most suitable option for the use environment.
• If you select an unsuitable option, it may greatly affect
• Select the most suitable option for the use environment.
• If you select an unsuitable option, it may greatly affect
on the duration of the projector life.
FILTER REMAINING
NOTE:
• After you replace the ARF, FILTER REMAINING should
be reset to “0” by pressing the ENTER button for
3 seconds.
3 seconds.