Справочник Пользователя для Barco DCS-200

Software Upgrade Overview

Firmware files for the DCS-200 are loaded into the hardware at power-up.  These files are 
stored in the unit’s onboard flash memory.  

The DCS-200’s system software can be easily upgraded using the following steps:

Download the appropriate “upgrade” file from the Barco FTP site or website.

Connect a PC (or laptop) to the DCS-200.

Launch a web browser.

Connect to the DCS-200 using its IP address.

Follow the upgrade instructions in the browser.

The following hardware items are required for upgrading DCS-200 software:

IBM compatible computer with an available Ethernet port

Local Ethernet network, including an Ethernet switch

The following list outlines software requirements for upgrading the DCS-200’s software:

Ensure that your PC (or laptop) uses the Windows

®

 2000 or Windows XP 

operating systems.

Ensure that your PC (or laptop) has a web browser installed, such as Windows 
Internet Explorer

®

 or Mozilla Firefox

®

.

Software files can be downloaded from either the Barco Folsom FTP site or the Barco 
website, as described in the following “

” section.