Справочник Пользователя для Barco DCS-200

Using the Setup Menu

those changes on the Preview source — while the Program source remains unchanged.

Figure 4-23.  Adjust On Field

If both paths are using the same input source, only the selected path is modified.

When LOGO is the input for the Adjust On selection, all the Input Menu values except 
Adjust On are bracketed.

In the Input Menu, the Type field shows the currently selected input type, and enables you 
to change the type if required.  The available types depend on the selected input:

For inputs 1 - 6:  CVBS, Y/C, YPBPR, RGB/HD-YUV

For inputs 7 - 8 (when Digital):  DVI

For inputs 7 - 8 (when Analog):  CVBS, Y/C, YPBPR, RGB/HD-YUV

For the SDI input:  [SDI]

From the Input Menu, select Colorspace to change the color space for the selected input 
on Program.  Values depend on the selected input.   Please note:

The default selection for YP

 or YUV is SMPTE.   In Appendix A, refer to the 

“

” on page 122 for information on the formats that are RGB, SMPTE 

or both.  When both formats are listed, the first item in the list is the default. 

The Colorspace Menu allows selection between these two values when the input 
is analog (excluding CVBS, Y/C) or DVI. 

When either the CVBS or Y/C input is selected, only [SMPTE] is shown.

When the following formats are detected as either SD-SDI or HD-SDI, only 
[SMPTE] is shown.

I N P U T

1 0 2 4 x 7 6 8   @ 5 9 . 9 4

> A d j u s t   O n

P r e v i e w

T

he SDI input always shows its type in brackets (e.g., [SDI]), 

given that this input type cannot be changed.

NTSC (480i)

PAL (576i)

1280x720p @50

1280x720p @59.94

1280x720p @60

1920x1080p @23.98

1920x1080p @24

1920x1080p @25

1920x1080p @29.97

1920x1080p @30

1920x1080sF@23.98

1920x1080sF@24

1920x1080i @50

1920x1080i @59.94

1920x1080i @60