Справочник Пользователя для Fujitsu RX900 S1
94
Maintenance Manual
RX900
S1
Hard disk and solid state drives
6.4.7
Removing the SAS backplane
Figure 43: Removing the SAS backplane
Ê
Loosen the captive screw (see circle) on the SAS backplane.
Ê
Remove the SAS backplane by pulling it straight upward. Do not tilt it.
6.4.8
Installing the SAS backplane
Figure 44: Installing the SAS backplane
Ê
Insert the SAS backplane into the bay until it clicks into place. Do not tilt it.
I
Make sure that the SAS backplane is installed correctly. Otherwise
the HDD/SSD modules can be damaged when you install them.
the HDD/SSD modules can be damaged when you install them.
Ê
Fasten the captive screw (see circle) on the SAS backplane.