Справочник Пользователя для Visioneer 4000
20
V
ISIONEER
N
ETSCAN
4000 U
SER
’
S
G
UIDE
S
PECIFYING
THE
S
CANNER
’
S
N
ETWORK
S
ETTINGS
1.
Turn on the machine. After warming up for a few seconds, the default
working mode is displayed on the touch panel. For example, the
following is for the Copy mode.
working mode is displayed on the touch panel. For example, the
following is for the Copy mode.
Note:
■
If the system administrator has chosen DHCP, then the IP address of
TCP/IP, gateway, subnet mask, and DNS server will be automatically
configured.
TCP/IP, gateway, subnet mask, and DNS server will be automatically
configured.
■
When installing the scanner for the first time, it is recommended that
the Administrator retain the default system settings. The settings can
be customized at a later date once you are familiar with the operation
and functionality of the scanner.
the Administrator retain the default system settings. The settings can
be customized at a later date once you are familiar with the operation
and functionality of the scanner.