Справочник Пользователя для Electrolux EOD67043
2. Hold the door strip (B) on both sides, align
it with the inner edge of the door and
press the door strip (B) into the upper
edge of the door.
press the door strip (B) into the upper
edge of the door.
B
On the open side of the door strip (B)
there is a guide bar (C). This must be
pressed between the outer side of the
door and the corner (D). The seal (E)
must audibly click into place.
there is a guide bar (C). This must be
pressed between the outer side of the
door and the corner (D). The seal (E)
must audibly click into place.
C
D
E
3. Open the door as far as it will go.
90°
4. Fold the clamp levers on both door hing-
es (A) down into their original position.
A
5. Close the oven door.
Warning! Before cleaning always allow
the appliance to cool down before
switching off at the electricity supply.
the appliance to cool down before
switching off at the electricity supply.
Cleaning materials
Before using any cleaning materials on your
appliance, check that they are suitable and
that their use is recommended by the man-
ufacturer.
Cleaners that contain bleach should not be
used as they may dull the surface finishes.
Harsh abrasives and scourers should also be
avoided.
Before using any cleaning materials on your
appliance, check that they are suitable and
that their use is recommended by the man-
ufacturer.
Cleaners that contain bleach should not be
used as they may dull the surface finishes.
Harsh abrasives and scourers should also be
avoided.
Cleaning the outside of the appliance
Do not use abrasive cleaning materials e.g.
abrasive cream cleaners, wire wool pads or
scourers on painted or printed finishes as
Do not use abrasive cleaning materials e.g.
abrasive cream cleaners, wire wool pads or
scourers on painted or printed finishes as
electrolux 25