Справочник Пользователя для GE PDW8400JWW

Скачать
Страница из 16
3
Installation Preparation–Enclosure
PREPARE DISHWASHER ENCLOSURE 
Figure A
To reduce the risk of shock, fire, or injury 
to persons, the installer must ensure that 
the dishwasher is completely enclosed at 
the time of installation.
#282 French
WARNING
• The rough cabinet opening must have a minimum width and 
depth of 24" and height of 34-1/2" ± 1/4" from the fl oor to the 
underside of the countertop.
• The back wall should be free of pipes or wires.
• Adjacent cabinets should be square and plumb to ensure a 
good fi t. Refer to Figure A
• For a corner installation, allow 2" minimum clearance 
between the dishwasher and the adjacent wall.
• Provide at least 28-3/8" in front of the dishwasher to allow the 
dishwasher door to open fully. Refer to Figure B
• Make sure the fl oor is level inside the opening and even with 
the fi nished fl oor of the kitchen. This will facilitate removal of 
the dishwasher at a later date for service, if needed.
Special consideration for a dishwasher installed on a 
elevated platform
The elevated platform must be flat and level.
Cabinets
Square
and
Plumb
Floor
MUST
be Even with 
Room Floor 
This Wall Area 
must be Free of 
Pipes or wires
Plumbing and Electric Service 
Must Enter Shaded Area 
34-1/2" ± 1/4" 
Underside of 
Countertop
to Floor 
24"
Minimum
24"
Minimum
5"
5"
4"
4"
6"
05A-1183E
Figure B
• The dishwasher must be installed no more than 
10 feet from sink for proper drainage.
• The dishwasher must be fully enclosed on the top, sides, and 
back.
• The dishwasher must not support any part of the enclosure.
2" Minimum
Countertop
Dishwasher
28-3/8" Minimum
Clearances:
In a corner installation, provide at 
least 2" clearance between the 
dishwasher and the adjacent 
cabinet, wall, or other appliance. 
Provide at least 28-3/8" of clearance 
in front of the dishwasher.