Справочник Пользователя для Ingersoll-Rand PD20R-X

2010

CCN 15199078

(800) 276-4658

FAX (800) 266-7016

INGERSOLL RAND COMPANY

209 NORTH MAIN STREET

BRYAN, OHIO 43506

OPERATOR’S MANUAL

PD20R-X

RELEASED:

9-12-03

REVISED:

11- 11-10

(REV. 0

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

2” DIAPHRAGM PUMP

1:1 RATIO (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Refer to Model Description Chart to match the pump material options.
637309-XX for fluid section repair (see page 4). NOTE: This kit also con-

tains several air motor seals which will need to be replaced.

637369 for air section repair (see page 6).
637374 major air valve assembly (see page 7).

PUMP DATA

Models

see Model Description Chart for “-XXX”.

. . . . . . . . . . . . .

Pump Type

Metallic Air Operated Double Diaphragm

. . . . . . . . . .

Material

see Model Description Chart.

. . . . . . . . . . . . .

Weight

PD20X-XCX-XXX

165 lbs (74.8 kgs)

. .

. . . . . .

PD20X-AHX-XXX

154 lbs (69.9 kgs)

. . . . . .

PD20X-ASX-XXX

154 lbs (69.9 kgs)

. . . . . .

PD20X-BHX-XXX

154 lbs (69.9 kgs)

. . . . . .

PD20X-BSX-XXX

154 lbs (69.9 kgs)

. . . . . .

PD20X-FHX-XXX

146 lbs (66.2 kgs)

. . . . . .

PD20X-FSX-XXX

146 lbs (66.2 kgs)

. . . . . .

Maximum Air Inlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . .

Maximum Material Inlet Pressure

10 p.s.i.g. (0.69 bar)

. . .

Maximum Outlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . . .

Maximum Flow Rate

(flooded inlet)

170 g.p.m. (644 l.p.m.)

. .

Displacement / Cycle @ 100 p.s.i.g.

1.4 gal. (5.3 lit.)

Maximum Particle Size

1/4” dia. (6.4 mm)

. . . . . . . . . .

Maximum Temperature Limits (diaphragm / ball / seal material)

E.P.R. / EPDM

-60

_ to 280_ F (-51_ to 138_ C)

. . . . . . . . . . .

Hytrel

-20

_ to 150_ F (-29_ to 66_ C)

. . . . . . . . . . . . . . . .

Nitrile

_ to 180_ F (-12_ to 82_ C)

. . . . . . . . . . . . . . . . .

Polypropylene

_ to 175_ F (2_ to 79_ C)

. . . . . . . . . . .

PVDF (Kynar

)

_ to 200_ F (-12_ to 93_ C)

. . . . . . . . . .

Santoprene

-40

_ to 225_ F (-40_ to 107_ C)

. . . . . . . . . . . .

PTFE

_ to 225_ F (4_ to 107_ C)

. . . . . . . . . . . . . . . . .

Viton

-40

_ to 350_ F (-40_ to 177_ C)

. . . . . . . . . . . . . . . . .

Dimensional Data

see page 8

. . . . . . . . . . . . . .

Mounting Dimension

9-1/16” x 10-1/16” (230 mm x 256 mm)

. . . . .

Noise Level @ 70 p.s.i., 60 c.p.m.

{

85.0 db(A)

. .

Tested with 67263 muffler assembly installed.
The pump sound pressure levels published here have been updated to an Equivalent

Continuous Sound Level (L

Aeq

) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-

ROP S5.1 using four microphone locations.

NOTICE: All possible options are shown in the chart, however, certain combina-
tions may not be recommended, consult a representative or the factory if you have
questions concerning availability.

Figure 1

MODEL DESCRIPTION CHART

PD20 X - X X X - X X X

PD20X - XXX - X X X

637309 - X X

Diaphragm

Ball

FLUID SECTION SERVICE KIT SELECTION

EXAMPLE: MODEL # PD20Y-ACP-SAA
FLUID SECTION SERVICE KIT # 637309-AA

SEAT MATERIAL
A - Santoprene

H - Hard 440 Stainless Steel

C - Hytrel

K - PVDF (Kynar)

E - Carbon Steel

L - Hastelloy - C

F - Aluminum

S - 316 Stainless Steel

G - Nitrile

DIAPHRAGM MATERIAL
A - Santoprene

M - Medical Grade Santoprene

C - Hytrel

T - PTFE / Santoprene

G - Nitrile

V - Viton

HARDWARE MATERIAL
P - Plated Steel
S - Stainless Steel

FLUID CAPS & MANIFOLD MATERIAL
C - Cast Iron
H - Hastelloy - C
S - Stainless Steel

THREAD
A - 2 - 11-1/2 N.P.T.F. - 1
B - Rp 2 (2 - 11 BSP parallel)
F - 2” A.N.S.I. / DIN Flange

AIR MOTOR / AIR CAP MATERIAL
R - Polypropylene / Stainless Steel
Y - Polypropylene / Cast Iron

BALL MATERIAL
A - Santoprene

S - 316 Stainless Steel

C - Hytrel

T - PTFE

G - Nitrile

V - Viton