Справочник Пользователя для Panasonic SA-XR30

RQT75

12

• When you turn the dimmer to “ON”, the following indicators change to dim.

Standby indicator [^] 

When the unit is connected to the
AC mains supply, this indicator
lights up in standby mode and
goes out when the unit is turned
on. 

Standby/on switch 
[POWER 8] 

Press to switch the unit from on to
standby mode or vice versa. 
In standby mode, the unit is still
consuming a small amount of
power.

For selecting speakers on or off. 
Turning the speakers off automatically
engages the STEREO/2CH MIX mode (when
listening through headphones, for example).

Press if an error message appears. A
message offering a possible solution
scrolls across the display.
To reinitiate the unit’s settings, press and
hold until “RESET” appears.

[% DIGITAL, % PLⅡ , DTS]

Lights to indicate the source’s
input signal and decoding format
used.
% DIGITAL: Dolby Digital sources 
% PL Ⅱ : Dolby Pro Logic Ⅱ decoder

is being used 

DTS: DTS sources 

For selecting input. 

Volume control.

For switching between FM and AM.

If reception is poor in FM, switch to the monaural mode by pressing until “MONO” appears.

For presetting radio stations.

[TUNE 2, 1] 

For tuning the radio and selecting preset stations. 
Press and hold until the frequency starts scrolling to start automatic tuning. Tuning stops when a station is found.

Headphone jack 
Plug type: 6.3 mm (1/4'')
stereo 
• Avoid listening for

prolonged periods of
time to prevent hearing
damage.

• Turn the speakers off

when using the
headphones. 

Speaker indicator
Lights when the speakers are
on.

[TUNED, ST,  , MONO] 

Radio indicators 

TUNED: A station is tuned. 

ST: A stereo FM broadcast is tuned.


: Flashes or lights during presetting. 

MONO: Lights when using the monaural

mode.

Sleep timer indicator.

SFC: Lights when using an

SFC mode.

2CH MIX: Lights when playing 

a multi-channel 
source in 2CH MIX 
mode.

[–DIGITAL INPUT–, L, C, R, S, 
LS, RS, LFE]

Program format indicators 
Show the channels contained in the
digital input signal. They do not light
when input is analog.
L: Front left channel 
C: Center channel 
R: Front right channel 
S: If the surround channel is

monaural. 

LS: Surround left channel 
RS: Surround right channel 
LFE (Low Frequency Effects):

Deep-bass effect.

Displays the frequency the unit is
processing.

Shows the input mode, radio
frequency, and other general
information.

Frequency unit indicators 
kHz: AM, or PCM sampling

frequency 

MHz: FM 

SPEAKERS

PHONES

INPUT SELECTOR

VOLUME

DOWN

UP

HELP
RESET

-

-

POWER  8