Справочник Пользователя для Ingersoll-Rand PF20X-X-X-B

201

CCN 15227663

(800)

495-0276

FAX (800)

892-6276

INGERSOLL RAND COMPANY

209 NORTH MAIN STREET- BRYAN, OHIO 43506

OPERATOR’S MANUAL

PF20X-X-X-B

RELEASED:

2-10-05

REVISED:

9-15-11

(REV. 04)

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

2” DIAPHRAGM PUMP

1:1 RATIO FLAP VALVE (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Refer to Model Description Chart to match the pump material options.

637310-XX for fluid section repair (see page 3).

637374-Xmajor air valve assembly(see page 7). Note: Thiskit also con-

tains several replacement air motor seals.

637421 for air section repair (see page 6).

PUMP DATA

Models

see Model Description Chart for “-XXX”.

. .

Pump Type

Metallic, Air Operated, Double Diaphragm, Flap Valve

Material

see Model Description Chart.

. .

Weight

PF20A-XAX-SXX-B

97.3 lbs (44.2 kgs)

. .

. . . . . .

PF20A-XCX-SXX-B

166.2 lbs (75.4 kgs)

. . . . . .

PF20A-ASX-SXX-B

166.0 lbs (75.3 kgs)

. . . . . .

PF20A-BSX-SXX-B

166.0 lbs (75.3 kgs)

. . . . . .

PF20A-FSX-SXX-B

177.1 lbs (80.3 kgs)

. . . . . .

(add 28.9 lbs [13.1 kgs] for stainless steel air motor section)

Maximum Air Inlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . . . .

Maximum Material Inlet Pressure

10 p.s.i.g. (0.69 bar)

. . . . .

Maximum Outlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . . . . .

Maximum Flow Rate

172 g.p.m. (651 l.p.m.)

. . . . . . . . . . . . . .

Displacement / Cycle @ 100 p.s.i.g.

1.4 gal. (5.3 lit.)

. . .

Maximum Particle Size

2” dia. (51 mm) semi-solids

. . . . . . . . . . . .

Maximum Temperature Limits (diaphragm / flap / bumper material)

E.P.R. / EPDM

-60_ to 280_ F (-51_ to 138_ C)

. . . . . . .

Nitrile

10_ to 180_ F (-12_ to 82_ C)

. . . . . . . . . . . . . .

Polyurethane

10_ to 150_ F (-12_ to 66_ C)

. . . . . . . .

SantopreneR

-40_ to 225_ F (-40_ to 107_ C)

. . . . . . . .

PTFE

40_ to 225_ F (4_ to 107_ C)

. . . . . . . . . . . . . .

VitonR

-40_ to 350_ F (-40_ to 177_ C)

. . . . . . . . . . . .

Dimensional Data

see page 8

. . . . . . . . . . . . . . . .

Mounting Dimension

9-1/16” x 10-1/16” (230 mm x 256 mm)

. . . . .

Noise Level

@ 70 p.s.i., 60 c.p.m.

{

85.0 db(A)

. . . .

{

Tested with 67263 muffler assembly installed.

The pump sound pressure levels published here have been updated to an Equivalent Continuous
Sound Level (L

Aeq

) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP S5.1 using four mi-

crophone locations.

Figure 1

MODEL DESCRIPTION CHART

PF20 X - X X X - S X X - B

PF20X - XXX - X X X - B

637310 - X X

Diaphragm

Flap

FLUID SECTION SERVICE KIT SELECTION

EXAMPLE: MODEL # PF20A-AAP-SAA-B

FLUID SECTION SERVICE KIT # 637310-AA

SEAT MATERIAL

S - Stainless Steel

DIAPHRAGM MATERIAL

A - Santoprene

T - PTFE / Santoprene

B - Santoprene

V - Viton

G - Nitrile

HARDWARE MATERIAL

P - Plated Steel

S - Stainless Steel

FLUID CAPS & MANIFOLD MATERIAL

A - Aluminum

C - Cast Iron

S - Stainless Steel

THREAD

A - N.P.T.F.

B - BSP

F - 2” A.N.S.I. / DIN Flange

CENTER SECTION MATERIAL

A - Aluminum

S - Stainless Steel

FLAP MATERIAL

A - E.P.R.

U - Polyurethane

G - Nitrile

V - Viton