Справочник Пользователя для Ingersoll-Rand 637412

2010

CCN 15214133

(800) 276-4658

FAX (800) 266-7016

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET -- BRYAN, OHIO 43506

1” DIAPHRAGM PUMP

OPERATOR’S MANUAL

PE10X-X-X-A0S

RELEASED:

9-15-04

REVISED:

11-13 -10

(REV.06)

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

1:1 RATIO (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Refer to Model Description Chart to match the pump material options.
637401-XX for fluid section repair (see page 4). NOTE: This kit also con-

tains several air motor seals which will need to be replaced.

637412 for air section repair (see page 6).

PUMP DATA

Models

see Model Description Chart for “-XXX”.

. . . . . . . . . . . . .

Pump Type

Metallic Air Operated Double Diaphragm

. . . . . . . . . .

Material

see Model Description Chart.

. . . . . . . . . . . . .

Weight

PE10R-XAX-XXX-A0S

17.87 lbs (8.11 kgs)

. . .

PE10R-XCX-XXX-A0S

34.77 lbs (15.77 kgs)

. . .

PE10R-XHX-XXX-A0S

39.17 lbs (17.77 kgs)

. . .

PE10R-XSX-XXX-A0S

37.77 lbs (17.13 kgs)

. . .

add 5.26 lbs (2.39 kg) for Aluminum air motor section
add 11.43 lbs (5.18 kg) for Stainless Steel air motor section

Maximum Air Inlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . . . .

Maximum Material Inlet Pressure

10 p.s.i.g. (0.69 bar)

. . . . .

Maximum Outlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . . . . .

Maximum Flow Rate

(flooded inlet)

52.2 g.p.m. (197.6 l.p.m.)

. . . .

Displacement / Cycle @ 100 p.s.i.g.

0.232 gal. (0.88 lit.)

. . .

Maximum Particle Size

1/8” dia. (3.3 mm)

. . . . . . . . . . . .

Maximum Temperature Limits (diaphragm / ball / seal material)

E.P.R. / EPDM

-60

_ to 280_ F (-51_ to 138_ C)

. . . . . . . . . . .

Hytrel

-20

_ to 150_ F (-29_ to 66_ C)

. . . . . . . . . . . . . . .

Nitrile

_ to 180_ F (-12_ to 82_ C)

. . . . . . . . . . . . . . . . .

Polypropylene

_ to 175_ F (2_to79_ C)

. . . . . . . . . . .

Santoprene

-40

_ to 225_ F (-40_ to 107_ C)

. . . . . . . . . . .

PTFE

_ to 225_ F (4_ to 107_ C)

. . . . . . . . . . . . . . . . .

Viton

-40

_ to 350_ F (-40_ to 177_ C)

. . . . . . . . . . . . . . . .

Dimensional Data

see page 8

. . . . . . . . . . . . . . . .

Mounting Dimension

4” x 6.25” (101.6 mm x 158.8 mm)

. . . . . . . .

Noise Level @ 70 p.s.i., 60 c.p.m.

80.6 db(A)

{

. . . . .

The pump sound pressure levels published here have been updated to an Equivalent

Continuous Sound Level (L

Aeq

) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-

ROP S5.1 using four microphone locations.

NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended, consult a representative or the
factory if you have questions concerning availability.

Figure 1

MODEL DESCRIPTION CHART

PE10 X - X X X - X X X - A0S

PE10X - XXX - X X X - A0S

637401 - X X

Diaphragm

Ball

FLUID SECTION SERVICE KIT SELECTION

EXAMPLE: Model # PE10A-ASP-AAA-A0S
Fluid Section Service Kit # 637401-AA

Seat Material
A - Santoprene

G - Nitrile

C - Hytrel

H - Hard 440 Stainless Steel

E - Carbon Steel

L - Hastelloy - C

F - Aluminum

S - 316 Stainless Steel

Diaphragm Material
A - Santoprene

M - Medical Grade Santoprene

C - Hytrel

T - / Santoprene

G - Nitrile

V - Viton

Hardware Material
P - Plated Steel
S - Stainless Steel

Fluid Caps & Manifold Material
A - Aluminum

H - Hastelloy - C

C - Cast Iron

S - Stainless Steel

Fluid Connection
A - 1 - 11-1/2 N.P.T.F. - 1
B - 1 - 11 BSP

Center Section Material
A - Aluminum
R - Polypropylene
S - Stainless Steel

Ball Material
A - Santoprene

S - 316 Stainless Steel

C - Hytrel

T - PTFE

G - Nitrile

V - Viton