Справочник Пользователя для Ingersoll-Rand 5599
E
2011
CCN 20083093
(800) 495--0276
D
FAX (800)892--6276
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET BRYAN, OHIO 43506
www.ingersollrandproducts.com
OPERATOR’S MANUAL
559X
RELEASED:
2-3-03
REVISED:
9-27-11
(REV. H)
CHOP-CHECK GREASE PUMP
2” AIR MOTOR
50:1 RATIO
0 - 7500 P.S.I. RANGE
INCLUDE MANUAL: S-
GENERAL INFORMATION (PN 97999-
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING
5596, 5597, 5598, 5599
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
•
UseonlygenuineIR
R
replacementpartstoassurecompatiblepres-
sure rating and longest service life.
•
637385 Pump Rebuild Kit.
Includes the necessary soft parts for
normal service of the entire pump.
SPECIFICATIONS
Model Series
559X
. . . . . . . . . . . . . . . . . .
Type
Air Operated, Chop-Check Grease Pump
. . . . . . . . . . . . .
Ratio
50:1
. . . . . . . . . . . . . . . . . . . . . . . .
Air Motor Diameter
2” (5.08 cm)
. . . . . . . . . . . . .
Stroke
3” (7.62 cm)
. . . . . . . . . . . . . . . . . . . . . .
Air Inlet
(female)
1/4 - 18 N.P.T.F. - 1
. . . . . . . . . . . . . .
Material Outlet
(female)
3/8 - 18 N.P.T.F. - 1
. . . . . . . . . . .
Pump Construction
Carbon Steel
. . . . . . . . . . .
Dimensional Data
see chart
. . . . . . . . . . . . . .
Weight
see chart
. . . . . . . . . . . . . . . . . . . . . . .
PERFORMANCE
Air Inlet Pressure Range
0 - 10.3 bar (0 - 150 p.s.i.)
. . . . . . . . .
Fluid Pressure Range
0 - 517.2 bar (0 - 7500 p.s.i.)
. . . . . . . . . . .
Cycles / Minute Rec’d @ Working Flow
80
. .
Displacement In
3
Per Cycle
0.300
. . . . . . .
Volume / Cycle
6.55 ml (0.22 oz.)
. . . . . . . . . . . . . . . . .
Maximum Delivery / Minute
4.1 kg (9 lbs)
. . . . . . .
Noise Level @ 100 p.s.i.
85
. . . . . . . . . .
Accessories Available
61113 Wall Mount Bracket
. . . . . . .
66073
-
1 Air Line Connection Kit
The pump sound pressure level has been updated to an Equivalent Continuous Sound
Level (L
Aeq
) to meet the intent of ANSI S1. 13-1971, CAGI-PNEUROP S5.1 using four
microphone locations.
GENERAL DESCRIPTION
The model 559X series chop-check grease pump is intended to be used
primarily for grease delivery systems. It uses carbon steel and other ma-
terials which make it compatible with most petroleum based lubrication
products.
NOTE: If this pump was purchased separately (not part of a system),
consult your sales representative for compatible dispensing accesso-
ries which will best match the application. All accessories must be able
to withstand the maximum pressure developed by the pump.
PUMP DATA
MODEL 559X
MODEL
“A”
(mm)
“B”
(mm)
WEIGHT
(kg)
5596
27-3/4”
(704)
16-9/16”
(421)
15
(6.8)
5597
30-1/2”
(774)
19-5/16”
(490)
15.9
(7.2)
5598
38-7/16”
(976)
27-1/4”
(692)
18.3
(8.3)
5599
48”
(1219)
36-13/16”
(935)
21.2
(9.6)
NOTE: Dimensions are shown in inches and (mm), supplied for reference only and are typically
rounded up to the nearest 1/16 inch.
Figure 1
Air Inlet (female)
(1/4 - 18 N.P.T.F. - 1)
Material Outlet (female)
(3/8 - 18 N.P.T.F. - 1)
2” N.P.S.M. Bung Adapter
8 mm (5/16”) Thru hole
“B”
“A”
1-1/4”
(31.8 mm)
IMPORTANT
This is one of two documents which support the pump. Replace-
ment copies of these forms are available upon request.
=
=
559X
Model Operator’s Manual (pn 97999-1033)
-
S-
General Information Lubrication Piston Pumps (pn 97999
WARNING READ THE GENERAL INFORMATION MANUAL
INCLUDED FOR ADDITIONAL OPERATING AND SAFETY PRE-
CAUTIONS AND OTHER IMPORTANT INFORMATION.
-
632
db (A)
Testedwith95086 mufflerassemblyinstalled.
1
1
632
-
624).
624).