Справочник Пользователя для Insignia NS-32D311NA15
50
NS-32D120A13 Insignia 32" 720p LED TV
www.insigniaproducts.com
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tuner
Inputs
Outputs
Audio
Power
After Auto Channel
Search, there are no
channels.
Search, there are no
channels.
•
Reception can vary by channel depending on the
broadcast power level of a given station. Contact
your cable or satellite TV provider.
broadcast power level of a given station. Contact
your cable or satellite TV provider.
•
Make sure that the antenna or cable/satellite TV
is connected securely to your TV.
is connected securely to your TV.
•
Try replacing the cable between the
antenna/cable or cable/satellite box and your
TV.
antenna/cable or cable/satellite box and your
TV.
One or more channels
do not display.
do not display.
•
Make sure that the channels are not blocked. See
“
“
” on page
.
•
Make sure that the channels are not hidden. The
channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add the
channel back to the channel list. See “
channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add the
channel back to the channel list. See “
” on page
•
If you are using a cable or satellite box, use the
remote that came with that box to change
channels.
remote that came with that box to change
channels.
•
Make sure that you have the correct input
selected to view channels from the cable or
satellite box.
selected to view channels from the cable or
satellite box.
•
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “
signal may be low. To check the digital channel
signal strength, see “
” on page
.
Password is lost.
•
Enter 9999 to access parental controls, then set
a new password. See “
a new password. See “
” on page
.
Some settings cannot be
accessed.
accessed.
•
If a setting is grayed, the setting is not available
in the current video input mode.
in the current video input mode.
TV cabinet creaks.
•
When the TV is in use, the temperature rises
naturally and may cause the cabinet to expand
or contract which can cause a creaking noise.
This is not a malfunction.
naturally and may cause the cabinet to expand
or contract which can cause a creaking noise.
This is not a malfunction.
Control buttons do not
work.
work.
•
Make sure that the Button Lock option is set to
Off. See “
Off. See “
” on page
.
•
Unplug the power cord, wait a few seconds, then
plug the cord back in and turn on your TV.
plug the cord back in and turn on your TV.
TV keeps turning off.
•
Make sure that the sleep timer is not turned on.
See “
See “
” on page
Without stand
29.16 × 19.06 × 3.87 in. (74.08 × 48.42 × 9.84 cm)
11.85 lbs. (5.37 kg)
With stand
29.16 × 20.73 × 7.25 in. (74.08 × 52.66 × 18.41 cm)
13.04 lbs. (5.91 kg)
Problem
Solution
Screen size measured
diagonally
diagonally
31.5 in.
Display type
LED
Panel 60 Hz vs.120 Hz
60Hz
Display resolution
720p
Panel resolution
1366 (H) × 768 (V)
Aspect ratio
16:9
Contrast ratio (typical)–panel
3000:1
Dynamic contrast ratio–
list value
list value
100,000:1
Brightness (center typical)
cd/m2
cd/m2
300 nits
Comb filter
3d y/c digital
Response time
6.5 ms
Horizontal viewing angle
178°
Vertical viewing angle
178°
HDMI
720p, 480p, 480i
Component video
720p, 480p, 480i
Analog
NTSC
Digital
ATSC, 8-VSB, Clear-QAM
HDMI/DVI
1 (side)/1 (back)
E-EDID compliant
HDCP compliant
Component video
1 (back)
Composite video
1 (back)
Shared audio (component
and composite)
and composite)
Yes
S-Video
No
PC/VGA
1 (back)
3.5mm PC audio input
1 (back)
USB
1 (side)
Supports JPEG and firmware upgrade
Coaxial cable
1 (side)
Video
No
Analog audio/headphone
1 (side)
Digital audio
1 optical (back)
WiFi
No
Ethernet
No
Speakers
Number: 2
Watts per channel: 5W
Power consumption
On: 75W
Standby: <1W
Power input
120V/60Hz