Справочник Пользователя для Phase Technology CM62-EZ

Independent Data Acquisition & 

Verification

All data for SoundTube speakers is

independently collected from and veri-

fied by NWAA Labs (www.nwaalabs.

com) using their proprietary MACH

testing system. All data is collected and

analysed according to ASTM, ISO and

AES standards using EASERA, TEF and

MLSSA. Full balloon data including

both phase and magnitude is compiled

into a variety of formats including EASE

4.x, GLL and CLF.

Architectural Specifications

 The loudspeaker shall consist of

one 165 mm (6.5 in) low-frequency

transducer and one 25.4 mm (1.0 in)

high-frequency transducer with a fre-

quency dividing network installed in

a sealed enclosure. The low-frequency

voice coil diameter shall be 25 mm (1

in). The low-frequency transducer shall

have a treated fiber cone material with

cloth surround. The high-frequency

transducer shall be constructed of silk

material using a balanced-dome con-

figuration.

Performance specifications of a typi-

cal production unit shall be as follows:

Usable frequency range shall extend

from 75 Hz - 22 kHz, -10 dB. The loud-

speaker shall be available with select-

able 25/70.7/100 Volt and 16 Ohm/voice

coil direct tap switch. The frequency

dividing network shall have a cross-

over frequency of 4.0 kHz. Rated power

capacity of the components and network

shall be at least 50 Watts continuous

RMS power and conform to EIA-426-B

testing. Maximum continuous output at

1 meter shall be at least 107.5 dB.
The backcan shall be constructed of

galvanized steel with an ABS plastic

baffle. The grille shall be constructed

of painted steel. Shipped complete with

UL-listed flex conduit clamp, color

coded tile bridge (to match color-coded

backcan), grille, wire nuts, cut-out

template and paint shield, the inte-

grated CM62-EZs in-ceiling speaker is

engineered for high performance and

rapid installation in plenum spaces. The

CM62-EZs incorporates a secondary

attachment point for added security, or

where required by code.
Installation for the CM62-EZs shall be by

2-screw blind-mount constant-tension

winged assembly and shall attach to ceil-

ing thicknesses ranging from 0.04 in to

1.6 in. The external wiring shall be hard-

wired using wire nuts accepting up to

three 18-gauge wires.
The CM62-EZs is factory preset to the 32

Watt setting in the 70.7 Volt operating

mode. The system shall be the SoundTube

CM62-EZs for both low & high impedance

applications.

SoundTube Entertainment

6430 North Business Park Loop  
Park City, Utah 84098
Phone  435.647.9555    
Fax 

435.647.9666     

Toll Free 800.647.TUBE
www.soundtube.com

 
All SoundTube products come  
with a 5-year limited warranty. 

Technical data, EASE

™

 plots, SoundTubeSPEC

™

 software & product downloads available at 

   

Technical Information for System Engineers