Справочник Пользователя для Jensen JHD1620

6

1.

Press and hold the PTY/CAT/MENU button (2) for more than 2 seconds to enter the sys-
tem menu. The first menu item, “Key Beep”, will appear on the display.

2.

Press the TUNE/SEEK |<< / >>| (18, 19) button repeatedly to navigate the system menu.

3.

Press the INFO/ENTER button (16) to select the desired item.

4.

Press the INFO/ENTER button again to adjust the selected menu item.

The following items can be adjusted:

•

Key Beep (Click / Beep / Off): Turn the audible beep On/Off (heard when functions/
buttons are selected).

•

LCD Backlight (1-10): Adjust LCD brightness.

•

LCD Contrast (1-10): Adjust LCD contrast.

•

Tuning Region (USA / EURO): Set frequency spacing for various regions. 

•

Power-Off Clock (On / Off)

•

Clock Format (12Hour / 24Hour): Select 12 or 24 hour display mode.

•

Set Clock (HH : MM): 
•

Press the INFO/ENTER button (16) to view the clock set screen. 

•

Press the INFO/ENTER button to move to the next digit.

•

Press the TUNE/SEEK |<< / >>| (18, 19) buttons to adjust the selected digit. 

•

Preset-Only Tuning (On / Off): 

•

Sirius Settings Menu (only appears when SIRIUS tuner is connected and in SIRIUS 
mode)
•

Clock Autoset (On / Off)

•

Time Zone1 (Atlantic / Eastern / Central / Mountain / Pacific / Alaska

•

Daylight Saving Time (Observed / Not Observed)

•

Clear Skipped Channels (Yes / No)

•

Skipped Channels: List of Channels (Skipped / Visible)

•

Set Lock Code: _ _ _ _

•

Locked Channels: List of Channels (Locked / Unlocked)

•

Enable Song Seek (Yes / No)

•

Edit Favorite Songs: List of Favorite Songs (Enable / Disable / Delete)

•

iPod Auto-Select (On / Off): Choose “On” to automatically detect and playback iPod when 
connected or “Off” to use the MODE button to select the iPod source.

•

Weather Alert Configuration
•

Min Alert Level (All / None / Warnings / Watches)

•

Auto-On Enable (Yes / No): Select “Enabled” to turn on the radio when NOAA alerts 
are issued. This function only works when the +12V switched is on.

•

Alert Volume (Select Volume Level 0-40)

•

Clear SAME Codes <ENTER>

•

SAME Code 1: _ _ _ _ _ _

•

SAME Code 2: _ _ _ _ _ _

•

SAME Code 3: _ _ _ _ _ _

•

SAME Code 4: _ _ _ _ _ _

•

SAME Code 5: _ _ _ _ _ _

•

SAME Code 6: _ _ _ _ _ _

•

SAME Code 7: _ _ _ _ _ _

•

Battery Alarm (Off / On)

•

Battery Auto-Off (Off / On)

•

Reset System Defaults <ENTER>: Press the INFO/ENTER button (16) to return the 
EEPROM to factory default set up values. 

•

Update Firmware <ENTER>: Press the INFO/ENTER button (16) to apply recent software 
updates.

Press the EQ/LOUD button (11) to choose one of the following pre-defined bass and treble 
curves: USER > FLAT > ROCK > CLASSICAL > POP.

Press and hold the EQ/LOUD button (11) to toggle loudness on/off. When listening to music at 
low volumes, this feature will boost the bass and treble ranges to compensate for the 
characteristics of human hearing. 

To access an auxiliary device: 

1.

Connect the portable audio player to either the AUX IN on the front panel (17) or at the 
rear of the unit.

2.

Press the MODE button (4) to select “Auxiliary” mode. The rear AUX IN audio source will 
play by default until a device is inserted into the front jack.

3.

Press MODE again to cancel “Auxiliary” mode and go to the next mode.

•

Connect the PA Microphone with a 4-PIN connector to the 4-PIN socket on the rear of the 
unit.

•

The unit will automatically switch to PA mode when the Mic switch is pushed “ON”.

•

The PA output level can be adjusted using the rotary volume encoder (1).

•

With radio power off, the radio will wake up when PA mic is keyed to make an 
announcement. Please note that it will take a few seconds before the radio “wakes up” 
and PA is active. Radio will return to the off state when the PA mic is released.

The current frequency and activated functions are shown on the LCD panel (21).