Справочник Пользователя для Smeg DO10PSS-5

Скачать
Страница из 25
Instructions for the user
 
 
 
31 
5.  ELECTRONIC ANALOGUE CLOCK (ONLY ON SOME MODELS) 
 
The programmer user instructions are valid only for the 
large oven. 
 
 
 
 
LIST OF FUNCTIONS 
 
MINUTE-MINDER BUTTON 
 
AUTOMATIC DURATION / AUTOMATIC STAR TIME BUTTON 
 
TIME SETTING AND RESET 
 
DECREASE TIME BUTTON 
 
INCREASE TIME BUTTON 
 
5.1 
Setting the time 
 
 
When the oven is used for the first time, or after a power failure, the display flashes on and off at 
regular intervals.  Press the 
 key for 1 to 2 seconds to stop the display flashing and start setting of 
the current time. Press the 
 or 
 keys to increase or decrease by one minute each time a key is 
pressed. 
Press one of the two value modification keys until the current time appears. The clock will start from 
the time set 6/7 seconds after the last key is pressed.
 
At the end of each programmed cooking operation, an intermitant alarm will sound 3 to 4 times at 
intervals of about 1 and a half minutes.  The beeps can be stopped at any moment by pressing any 
 
key. 
5.2 
Minute-minder 
 
 
This function does not stop cooking but just triggers the alarm.
 
 
-  When the 
 key is pressed the display illuminates, appearing as shown in 
figure 1; 
-  Press the   or 
 keys within 6 to 7 seconds to set the minute-minder.  
Whenever a key is pressed, 1 outside segment, representing 1 cooking 
minute will light up (figure 2 shows 10 cooking minutes). 
1    
-  The countdown will start 6 to 7 seconds after the last key is pressed; at the 
end of it, you will hear the alarm. 
 
-  During cooking with countdown, the current time can be displayed by 
pressing the  
 key once; press again to return to the minute-minder display. 
-  At the end of the countdown, the oven has to be switched off by hand, 
by turning the thermostat and the function selector to 0. 
2