Справочник Пользователя для Jacuzzi J-345

35

L3 lock mode: The temperature and CLEARRAY buttons are 

deactivated. This mode can be used to prevent 

unauthorized temperature adjustments.

To activate and deactivate the lock modes, follow the steps below:

A.  Press the 

Menu ( 

 ) button five times to display the Lock Menu 

(Figure 10). The LED screen will display “LOC.”

B.  Press the 

Warmer (   ) button to enter the menu. The LED screen 

will display the current status of the Lock Mode setting, either L1, L2, 

L3 or OFF.

C.  Press the 

Warmer (   ) button to scroll through the modes.

D.   Once the new setting appears of the display, press the 

1 ( 

 ) button to confirm your selection (Figure 11). The display of 

the LED screen will blink twice to indicate that the change has been 

accepted. You must press the 

Jets Pump 1 ( 

 ) button to confirm 

your selection or the current settings will remain active.

Note: If no button is pressed within 5 seconds of each selection the 

screen will revert back to the Main Menu and the current settings will 

remain active.

To prevent unauthorized use of the menu features, you can lock the 

Menu access button. When the lock feature is activated, access to the 

Primary Filtration, Secondary Filtration, CLEAR

RAY, Economy and Lock 

programming menus is deactivated. The temperature setting feature, jets 

pumps operation and lighting features are still accessible.

To activate the Top Menu locking feature, follow the steps below:

A.  Press and hold the 

Menu ( 

 ) button for 10 seconds.

B.  The LED screen will display “LOC.” The LOC display will also blink 

twice to indicate that the change has been accepted.

C.  When done the LED display will return to the temperature display.

D.   When the LOC feature is active, any time you press the 

Menu ( 

 ) 

button, the LED will display “LOC.”

To deactivate the Top Menu locking feature, follow the steps below:

A.  Press and hold the 

Menu ( 

 ) button for 10 seconds.

B.  The LED screen will display “LOC.” The LOC display will also blink 

twice to indicate that the change has been accepted.

C.  You will now have access to the Menus.

Figure 11

►

◄

◄

▲

◄

◄

◄

◄

◄

◄

◄

◄

◄

◄

Figure 10