Руководство Пользователя для Toshiba M40

User’s Manual

9-20

Troubleshooting

TV output signal

Refer also to your Personal Conferencing Kit’s documentation.

USB

Refer also to your USB device’s documentation.

Problem

Procedure

Display on TV is poor

Make sure the TV type is correct for your area:

NTSC (US, JAPAN), PAL (Europe).

No display

Try adjusting the contrast and brightness controls

on the external monitor.

Press hotkeys Fn + F5 to change the display.

Refer to Chapter 5,

NOTE: If you turn the computer off in Resume

mode while the display is on TV, the computer

will select either the internal LCD or an external

computer CRT as the display device.
If problems persist, contact your dealer.

Problem

Procedure

USB device does not

work

Check for a firm cable connection between the

USB ports on the computer and the USB device.

Make sure the USB device drivers are properly

installed. Refer to your Windows documentation

for information on checking the drivers.

If you are using an operating system that does

not support USB, you can still use a USB mouse

and/or USB keyboard. If these devices do not

work, make sure the USB KB/Mouse Legacy

Emulation item in HW Setup is set to Enabled.
If problems persist, contact your dealer.