Руководство Пользователя для Netopia 4741 2a4na

These screens allow you to configure your network’s use of the standard networking protocols:

■

IP: Details are given in 

.

These screens allow you to configure security on your network by means of filter sets and a basic firewall.

■

Details are given in 

These screens allow you to configure IP address ser ving on your network by means of DHCP, WANIP, and BootP.

■

Details are given in 

You can set the system’s date and time in the Set Date and Time screen.

Select Date and Time in the System Configuration screen and press Return. The Set Date and Time screen 
appears.

The Netopia 4741 uses Network Time Protocol (NTP) by default to set the date and time automatically. You may 
want to modify the default settings for your own environment.

NTP takes effect five minutes after the device boots. At that time NTP attempts to connect to a central Time 
Ser ver and set the device’s clock. If the device is rebooted for any reason, the time settings rever t to an 
internal default date and time for five minutes until NTP can reconnect to its time ser ver and reset the clock.

                               Set Date and Time

         NTP (Network Time Prot.) Enabled:  On
         Time Server Host Name/IP Address   204.152.184.72
         Time Zone...                       GMT -8:00 Pacific Standard Time
         NTP Update Interval (HHHH:MM)      1:00

         System Date Format:                MM/DD/YY

         System Time Format:                AM/PM