Инструкции По Установке для Quantum atl 7100
Appendix A SCSI Cabling Options
Two-Wire SCSI Configuration (Default)
Quantum|ATL 7100 Series Facilities Planning and Installation Guide
37
Two-Wire SCSI Configuration (Default)
1
This configuration connects the robotics controller, Drive 0, and
Drive 1 on one SCSI channel (interface). The second SCSI channel
is configured for drive 2 and drive 3 (see
Drive 1 on one SCSI channel (interface). The second SCSI channel
is configured for drive 2 and drive 3 (see
The first channel from the host controller connects to the rear panel
connector labeled
connector labeled
SCSI PORT 1
on the back of the unit and
externally terminates at the connection labeled
SCSI PORT 2
. The
second SCSI channel from the host connects to the connector
labeled
labeled
SCSI PORT 3
and externally terminates at the rear panel
connector labeled
SCSI PORT 4
.
Note:
This is the default configuration of the library as shipped
from the factory. The external SCSI terminators are
provided in the accessories kit, but they are not shipped
installed on the rear panel.
from the factory. The external SCSI terminators are
provided in the accessories kit, but they are not shipped
installed on the rear panel.