Руководство Пользователя для Quantum atl 7100

Chapter 1  Introduction
Operator Accessible Components

8

Quantum|ATL 7100 Series Library Operator’s Guide

1

The load port is located at the front of the library above and to the 
left of the control panel (see 

). It allows an operator to insert 

and/or remove up to four tape cartridges (see 

 for a 

description of the load port buttons).

To load/remove cartridges, press the 

button. When the 

indicator stops blinking, the load port door opens and allowing the 
operator to insert tape cartridges. To close, press the 

 button 

and push the door to the closed position.

For the unload operation, the gripper places tape cartridges in the 
load port bins. Looking through the view port, the operator will be 
able to decide if an unload operation is necessary. Pressing the 

 button automatically opens the door allowing the operator 

to remove the tape cartridge(s).

(Indicator)

The

 indicator illuminates when the library has an error condition. 

The SDA displays the name of the error condition.  For a listing and 
detailed description of all status messages shown in the SDA, see chapter 
3, 

This is a 16-character, 2-line liquid crystal display (LCD) display. It 
displays status messages that describe the operating state of the library. It  
also displays menu options when the library is in menu mode.

You must release the 

 button before pushing 

the load port door closed.