Руководство Пользователя для Sony dcr-dvd108
Connecting your camcorder to a computer using a cable
You can connect your camcorder to a computer using a USB cable.
Connection image (USB cable and USB jack)
Note
z
When connecting your camcorder to a computer, make sure you insert the connector in the correct direction. Do not insert
the connector forcibly as it may damage the cable or your camcorder.
the connector forcibly as it may damage the cable or your camcorder.
Tip
z
Your camcorder is compatible with Hi-Speed USB (USB 2.0). You can transfer data at a faster rate using a computer
compatible with Hi-Speed USB (USB 2.0). When you connect a USB interface not compatible with Hi-Speed USB (USB
2.0), the data transfer ratio will be that of USB 1.1 (USB Full-Speed).
compatible with Hi-Speed USB (USB 2.0). When you connect a USB interface not compatible with Hi-Speed USB (USB
2.0), the data transfer ratio will be that of USB 1.1 (USB Full-Speed).
1
Turn on the computer.
If any software starts on the computer automatically, close it.
2
Connect your camcorder to a power source, and turn on your camcorder.
Use the AC Adaptor as the power source.
For operating the POWER switch, refer to the Operating Guide supplied with your camcorder.
For operating the POWER switch, refer to the Operating Guide supplied with your camcorder.
3
Insert a recorded disc or a “Memory Stick Duo” into your camcorder.
4
Connect the USB cable to the USB jack on the camcorder firmly.
For the location of the USB jack, refer to the Operating Guide supplied with your camcorder.
5
Connect the other end of the USB cable to the USB port on your computer.
The [USB SELECT] screen is displayed on the screen of your camcorder.
Tip
z
When the screen is not displayed, select the item from the menu. For selecting the menu, refer to the operating
instructions supplied with your camcorder.
instructions supplied with your camcorder.
6
When using videos recorded on a disc, select [
COMPUTER]. When using ones in a
“Memory Stick Duo,” select [
COMPUTER].
When you select [
COMPUTER]
The first time you connect your camcorder to a computer and select [
COMPUTER], it takes some
time until the computer recognizes your camcorder. When the computer recognizes your camcorder,
Chapter 1: Setting up for the first time