Руководство Пользователя для Sony PDW-F330L

24

Location and Function of Parts

  

Ch
apt

er 1  Ov

e

rv

ie

w

Even when you are recording or playing back HD 23.98P 
signals, 23.98PsF signals are not output from this 
connector. The output is 59.94i signals after 2-3 pulldown.

c VIDEO OUT (video output) connector (BNC type)

Outputs a video signal for a video monitor. The output 
signal is composite or HD Y. When the output signal is 
composite, setting menus, timecode, or shot data can be 
superimposed on the camera output video depending on 
the menu settings, and you can view them on the monitor 
screen. To lock the timecode of an external device to the 
timecode of this unit, connect the genlock signal input 
connector of the external device to this connector.

• The subcarrier phase cannot be adjusted.
• Even when you are recording or playing back HD 

23.98P signals, 23.98PsF signals are not output from this 
connector. The output is 59.94i signals after 2-3 
pulldown.

You can select the composite or HD Y signal output on the 
OUTPUT page of the OPERATION menu. For details, see 
“Selecting the Output Signals” on page 140. 

d TC OUT (timecode output) connector (BNC type)

To lock the timecode of an external VTR to the timecode 
of this unit, connect this connector to the external VTR’s 
timecode input connector.

e TC IN (timecode input) connector (BNC type)

To apply an external lock to the timecode of this unit, input 
the reference timecode.

a TALLY (back tally) indicator (red)
Lights up during recording. It will not light if the TALLY 
switch (see below) is set to OFF. This indicator also flashes 
to indicate warnings (see page 19) in the same manner as 
the REC/TALLY indicator in the viewfinder.

b TALLY switch
Set to ON to activate the TALLY indicator (see above) 
function.

c Battery attachment shoe
Attach a BP-GL95/GL65/L60S/L80S Battery Pack. 
Alternatively, you can attach an AC-DN2B/DN10 AC 
Adaptor to operate the camcorder on AC power supply.

For details about how to attach the battery or AC adaptor, 
see “Preparing a Power Supply” on page 36. For 
information about attaching a synthesized tuner, see 
“Attaching a UHF Synthesized Tuner” on page 47.

For your safety, and to ensure proper operation of the 
camcorder, Sony recommends the use of the following 
battery packs: BP-GL95, BP-GL65, BP-L60S, and BP-
L80S.

d WRR connector (7-pin)
Connect a CA-WR855 Camera Adaptor with attached 
WRR-855 UHF Synthesized Tuner.

1

TALLY indicator

2

TALLY switch

3

Battery attachment 
shoe

4

WRR connector

1 Connector panel