Руководство Пользователя для Sony PMW-350K
Locations and Functions of Parts and Controls
12
Chapt
er
1
Ov
er
v
er
v
ie
w
output terminal of the BC-L70, BC-L160, or
another battery charger.
another battery charger.
d DC OUT 12V (DC power output)
connector (4-pin, female)
Supplies power for an optional WRR-860C/861/
862 UHF Synthesized Diversity Tuner
(maximum 0.5 A).
862 UHF Synthesized Diversity Tuner
(maximum 0.5 A).
Note
Do not connect any equipment other than the UHF
synthesized diversity tuner.
synthesized diversity tuner.
e Battery attachment shoe
Attach a BP-L80S Battery Pack. Alternatively,
you can attach an AC-DN2B/DN10 AC Adaptor
to operate the camcorder on AC power supply.
you can attach an AC-DN2B/DN10 AC Adaptor
to operate the camcorder on AC power supply.
For details, see “Preparing a Power Supply”
(page 31).
(page 31).
Note
For your safety, and to ensure proper operation of the
camcorder, Sony recommends the use of the BP-L80S
Battery Pack.
camcorder, Sony recommends the use of the BP-L80S
Battery Pack.
Adaptor connector
Enables connection of an XDCA-55 HD Camera
Adaptor or an HDCA-702 MPEG TS Adaptor. To
connect an adaptor, remove the cover from the
connector and install the optional CBK-CE01 50
Pin Interface and Digital Extender.
Enables connection of an XDCA-55 HD Camera
Adaptor or an HDCA-702 MPEG TS Adaptor. To
connect an adaptor, remove the cover from the
connector and install the optional CBK-CE01 50
Pin Interface and Digital Extender.
a Shoulder strap fitting
Attach the supplied shoulder strap (see page 45).
b Accessory fitting shoe
Attach an optional accessory such as a video light
(see page 44).
(see page 44).
c Viewfinder front-to-back positioning
lever
To adjust the viewfinder position in the front-to-
back direction, loosen this lever and the LOCK
knob. After adjustment, retighten this lever and
the LOCK knob.
back direction, loosen this lever and the LOCK
knob. After adjustment, retighten this lever and
the LOCK knob.
d Viewfinder left-to-right positioning ring
Loosen this ring to adjust the left-to-right position
of the viewfinder (see page 33).
of the viewfinder (see page 33).
e Viewfinder fitting shoe
Attach the viewfinder.
f VF (viewfinder) connector (26-pin,
rectangular)
Connect the cable of the supplied viewfinder.
g VF (viewfinder) connector (20-pin,
round)
Connect the cable of the optional DXF-51 or
DXF-20W viewfinder.
DXF-20W viewfinder.
For connecting the DXF-51, optional parts are
required. Consult a Sony service representative for
information about connecting the DXF-51.
required. Consult a Sony service representative for
information about connecting the DXF-51.
Accessory Attachments