Руководство Пользователя для Sony PMW-350K
Preparing the Audio Input System
40
Cha
p
te
r 2
P
rep
ar
ar
at
ions
4
Use manual or power zoom to set the
lens to telephoto.
lens to telephoto.
5
Point the camcorder at the chart by
turning the focus ring and focus on it.
turning the focus ring and focus on it.
6
Set the zoom ring to wide angle.
7
Turn the F.f or F.B ring until the chart
is in focus, being careful not to disturb
the focus ring.
is in focus, being careful not to disturb
the focus ring.
8
Repeat steps
4
to
7
until the chart stays
in focus all the way from wide angle to
telephoto.
telephoto.
9
Tighten the F.f or F.B ring fixing
screws.
screws.
Attach the supplied microphone to the
microphone holder of the supplied viewfinder.
microphone holder of the supplied viewfinder.
1
Loosen the screw and open the
microphone holder clamp.
microphone holder clamp.
2
Place the microphone in the
microphone holder.
microphone holder.
1
Wind the microphone spacer around
the microphone, while peeling off the
protective sheets on both sides of the
microphone spacer.
the microphone, while peeling off the
protective sheets on both sides of the
microphone spacer.
2
Place the microphone in the holder so
that “UP” is at the top.
that “UP” is at the top.
3
Close the microphone holder.
4
Tighten the screw.
Preparing the Audio
Input System
Input System
Connecting a Microphone to the
MIC IN Connector
MIC IN Connector
Microphone holder clamp