Руководство Пользователя для Sony PMW-350K
Setting the Time Data
59
Chap
ter
3
3
Ad
jus
tme
nt
jus
tme
nt
s
an
d Set
d Set
tings
You can now adjust the levels of audio
channels 3 and 4 with the knobs selected
here.
channels 3 and 4 with the knobs selected
here.
Note
When picture cache mode is enabled, it is not possible to
set time data, even if you set the F-RUN/SET/R-RUN
switch to SET. If you want to set time data, first exit
picture cache mode.
set time data, even if you set the F-RUN/SET/R-RUN
switch to SET. If you want to set time data, first exit
picture cache mode.
The timecode setting range is from 00 : 00 : 00 :
00 to 23 : 59 : 59 : 29 (hours : minutes : seconds :
frames).
00 to 23 : 59 : 59 : 29 (hours : minutes : seconds :
frames).
1
Set the DISPLAY switch to TC.
2
Set the PRESET/REGEN/CLOCK
switch to PRESET.
switch to PRESET.
3
Set the F-RUN/SET/R-RUN switch to
SET.
SET.
The first (leftmost) digit of timecode flashes.
4
Use the up and down arrow buttons to
change values, and use the left and right
arrow buttons to move the flashing
digit. Repeat until all digits are set.
change values, and use the left and right
arrow buttons to move the flashing
digit. Repeat until all digits are set.
To reset the timecode value to 00:00:00:00
Press the RESET/RETURN button.
Press the RESET/RETURN button.
5
Set the F-RUN/SET/R-RUN switch to
F-RUN or R-RUN.
F-RUN or R-RUN.
F-RUN: Free run. The timecode generator
keeps running.
R-RUN: Recording run. The timecode
generator runs only while recording.
To set the drop frame mode/non-drop frame
mode
You can select the drop frame (DF) mode or non-
drop frame (NDF) mode on MAINTENANCE
>Timecode in the setup menu.
mode
You can select the drop frame (DF) mode or non-
drop frame (NDF) mode on MAINTENANCE
>Timecode in the setup menu.
Setting
Knob
Side4
LEVEL (CH4) knob
Front
MIC LEVEL cotrol
Front+Side4
LEVEL (CH4) knob and
MIC LEVEL cotrol (linked
operation)
MIC LEVEL cotrol (linked
operation)
Setting the Time Data
Setting the Timecode