Руководство Пользователя для Sony mhs-cm1

[ W/T Using the zoom

Slide the zoom lever toward T to zoom in, 
slide the zoom lever toward W to zoom out.
You can use the Digital Zoom function by 
selecting [Digital Zoom] in 

 (Camera). 

When the zoom scale exceeds 5

×, the 

camera uses the Digital Zoom function.

[

Press 

b

 (

) on the control button 

repeatedly until the desired mode is 
selected.

(No indicator): Auto

The camera adjusts the focus automatically on 
subjects, from those distant to close-up.
Normally, set the camera to this mode.

 : Macro

The camera adjusts the focus with priority on 
subjects close-up.
Set the Macro on when shooting close 
subjects.

• When shooting in Macro, the Auto Focus speed 

slows down than usual.

• It is recommended to set the zoom all the way to 

the W side.

• It is recommended to shoot in Macro when the 

shooting distance is less than approximately    
90 cm (3 feet).

[ Using the video light

Press V (LIGHT) on the control button 
repeatedly until the desired icon is 
displayed on the LCD screen.

(No indicator): Video light off

 : Video light on

• The video light is for assisting the recording in a 

dark place, and therefore the same effect as of a 
normal flash of the camera cannot be expected.

• The video light turns off when the camera 

switches to playback mode.

[

Press B (

) on the control button.

(No indicator): Not using the self-timer

: Using the self-timer

If you press PHOTO, countdown timer is 
displayed, and after rapid beep sounds are 
heard, the camera will shoot.

[ Recording in mirror mode

Open the LCD panel 90 degrees to the 
camera (

1

), then rotate it 180 degrees to 

the lens side (

2

).

• A mirror-image of the subject appears on the 

LCD screen, but the image will be normal when 
recorded.

• A mirror-image of the subject also appears on 

the LCD screen if you keep the LCD panel 
rotated 180 degrees and close the LCD panel 
with the LCD screen facing out.

• The same image as those recorded appears on 

the LCD screen instead of the mirror-image in 
playback mode.

[ Changing the screen display

Each time you press v (DISP) on the 
control button, the display changes as 
follows.

Histogram on
r
Indicators off
r
Indicators on

1

2