Справочник Пользователя для Sony pdw-f335l
21
Location and Function of Parts
Chapt
er 1 Ov
e
rv
ie
w
WRR-855 series UHF synthesized tuner (supplied
separately) is installed using the CA-WR855
separately) is installed using the CA-WR855
R (REAR): Audio input signals from an audio device
connected to the AUDIO IN CH-1/CH-2 connectors
(The signal input to the AUDIO IN CH-1 connector is
recorded on channel 3, and the signal input to the
AUDIO IN CH-2 connector on channel 4.)
(The signal input to the AUDIO IN CH-1 connector is
recorded on channel 3, and the signal input to the
AUDIO IN CH-2 connector on channel 4.)
For audio channels 3 and 4, level adjustment can only be
performed in AUTO (automatic) mode. The audio level of
these channels cannot be adjusted in MANUAL (manual)
mode.
performed in AUTO (automatic) mode. The audio level of
these channels cannot be adjusted in MANUAL (manual)
mode.
k VIDEO OUT (video output) CHARACTER switch
Selects whether or not (ON/OFF) to superimpose text
information on the VIDEO OUT connector output.
Selects whether or not (ON/OFF) to superimpose text
information on the VIDEO OUT connector output.
l F-RUN/SET/R-RUN (free run/set/recording run)
switch
Selects the operating mode of the internal timecode
generator. The operating mode is set as explained below,
depending on the position of the switch.
F-RUN: Timecode keeps advancing, regardless of the
generator. The operating mode is set as explained below,
depending on the position of the switch.
F-RUN: Timecode keeps advancing, regardless of the
operating state of the VDR. Use this setting when
synchronizing the timecode with an external
timecode.
timecode.
SET: Sets the timecode or user bits.
R-RUN: Timecode advances only during recording. Use
R-RUN: Timecode advances only during recording. Use
this setting to have a consecutive timecode on the
disc.
disc.
m FRONT MIC LOW CUT switch
Set to ON to insert a high-pass filter in the microphone
circuit, reducing wind noise. Normally leave the switch in
the OFF position.
Set to ON to insert a high-pass filter in the microphone
circuit, reducing wind noise. Normally leave the switch in
the OFF position.
n PRESET/REGEN (regeneration)/CLOCK switch
Selects whether to set a new timecode or to utilize the
existing timecode.
PRESET: Records a new timecode.
REGEN: Records timecode continuous with the existing
Selects whether to set a new timecode or to utilize the
existing timecode.
PRESET: Records a new timecode.
REGEN: Records timecode continuous with the existing
timecode recorded on the disc. Regardless of the
setting of the F-RUN/SET/R-RUN switch, the
camcorder operates in R-RUN mode.
setting of the F-RUN/SET/R-RUN switch, the
camcorder operates in R-RUN mode.
CLOCK: Records timecode synchronized to the internal
clock. Regardless of the setting of the F-RUN/SET/R-
RUN switch, the camcorder operates in F-RUN mode.
RUN switch, the camcorder operates in F-RUN mode.
Left Side and Upper Section
a ASSIGN 3/4 switches
You can assign the desired functions to these switches on
the ASSIGNABLE page of the OPERATION menu.
You can assign the desired functions to these switches on
the ASSIGNABLE page of the OPERATION menu.
For details, see “Assigning Functions to ASSIGN
Switches” on page 141.
Switches” on page 141.
b Large viewfinder attachment shoe
Use this to mount an optional 5-inch electronic viewfinder
(see page 38).
Use this to mount an optional 5-inch electronic viewfinder
(see page 38).
Note
1
ASSIGN 3/4 switches
2
Large viewfinder attachment shoe
4
Lid of the disc compartment
6
Shoulder strap fitting
7
Viewfinder left-to-right positioning ring
8
Viewfinder fitting shoe
qa
MIC IN connector
9
Fitting for optional microphone holder
0
LIGHT connector
3
Viewfinder front-to-back
positioning knob
positioning knob
5
Accessory fitting shoe
qs
Shoulder pad
1 Video output and timecode connectors