Справочник Пользователя для Sony pdw-f335l

51

Basic Procedure for Shooting

  Chapt

er

 3

  Rec

o

rd

ing and

 P

la

y

bac

k

• If the salvage succeeded, the message 

“COMPLETED.” appears.

• If the salvage failed, the message 

“INCOMPLETED.” appears. Clips for which 
recording did not end normally are lost.

To exit without salvaging 
Select NO in step 2 to exit without performing salvage 
processing.
However, the status of the disc does not change. 
Salvage is still required to recover the clips for which 
recording did not end normally. The salvage message 
will appear again when that disc is inserted again, or 
when the camcorder is powered on again.

If salvage processing is not done, sections which were 
recorded normally can be played back, but no new 
recording can be done on the disc.

Set the POWER switch to ON.

Set the FILTER selector and the 5600K button 
appropriately for the lighting conditions.

a) The range over which the subject is sharply in focus. Thus, “reducing 

the depth of field” means that the range is reduced as well, and 
“increasing the depth of field” means that it is increasing as well.

Check the switch settings on the camcorder.

If you do not have enough time to check the settings of 
the unit, you can turn the EZ MODE-assigned switch 
on to use EZ mode for instant shooting.

EZ mode
In EZ mode, the settings of this unit are fixed at 
standard values, and the lens aperture and white 
balance are adjusted automatically. In this state, it is 
not possible to change menu or other settings. To 
change settings, turn EZ mode off. In the factory 
default configuration, the ASSIGN 1 switch (see page 
13) turns EZ mode on and off.

Check the settings in the menu.

1 (CLEAR)

Indoor shooting

2 (

1

/

4

 ND)

Cloudy or rainy outdoor shooting, 
or to reduce the depth of field 

a)

3 (

1

/

16

 ND)

Sunlight

4 (

1

/

64

 ND)

To reduce the depth of field in 
sunlight