Руководство Пользователя для iLuv i913

Noise-Canceling Headset w/ Bluetooth wireless technology       V20M20_IM_EN_08312007 

www.i-Luv.com 

Before using this headset, make sure that it is paired with a mobile phone and audio 
devices with Bluetooth wireless technology. To pair with such a device, follow the 
instructions below: 

 

1.  If i913 is currently turned on then press the 

Multi-Function button for approximately five 
(5) seconds. There will be a high-pitched beep 
with red light flashes about 4 times and 
headset will go into standby mode. 

2.  Press and hold the Multi-function button 

for approximately five (5) seconds until the 
red and blue lights blink alternately 
around the button. The headset is now 
ready for pairing. (Note: Pressing the 
Multi-function button longer than five (5) 
seconds will turn off the headset. If this 
fails, turn off the headset and  turn it on 

again by holding the Multi-Function button for five (5) seconds for pairing mode) 

 
3.  Set your mobile phone or audio 

device to its pairing mode (phones 
and audio devices with Bluetooth 
wireless technology will have their 
own pairing instructions. See 
owner’s manual of the phone or 
device for these instructions).  

 

4.  Place the mobile phone or audio device and the i913 

close together during pairing. The mobile phone and 
most audio devices will detect i913 and identify it, 
displaying the model number i913. 

 
 
5.  Once the i913 has been identified, confirm as per the 

instructions on the device. You will be required to 
enter a password on the next screen.